HAVEN Connect is a Bluetooth enabled smart lock that installs under the bottom of your door for strong, reliable home security. Using the HAVEN mobile app, you can control HAVEN Connect remotely to secure your home. Total access. Total Security. The Gateway Hub along with the mobile app will allow you to Connect from anywhere, without the Hub, you will need to be within Bluetooth Low Energy range to operate the lock. Will Haven Fit My Door – The Nickel Test: HAVEN is 0. 8 inches high and should fit in the clearance path of most modern doors. A standard USD Nickel can be used to gauge the gap perfectly. Take a nickel, stand it on its end and make sure that it can pass under your door. *some resistance against the rubber door sweep is acceptable* If there is a gap above the nickel during the nickel test you can always purchase a riser. You can add up to 3 total risers. One comes in the box (1/8 inch thick). Additional risers can be purchased. You may need to buy longer screws if you need more than 3.
Make sure this fits by entering your model number.
ULTRA-STRONG LOCKING WEDGE: HAVEN has been tested to be 10x stronger than a standard deadbolt lock. HAVEN is anchored to the floor and able to distribute force applied to the door into a 30-inch steel baseplate. The locking wedge flexes to receive force applied making your entire door stronger at preventing a residential door break in.
SMART PHONE APP CONTROL: HAVEN Connect is easy and simple to use. Mechanically the locking wedge is engaged by stepping on the activation pedal. To unlock, simply step on the locking wedge. HAVEN Connect offers additional access control via a smartphone app (Android and IOS) or additional key fob to lock and unlock. The mobile app allows you to lock and unlock, send digital keys, check battery charge percentage, and much more. Future upgrades also available via software updates.
EASY TO INSTALL: HAVEN can easily be installed onto hardwood, tile, concrete, vinyl or any hard flat surface. The average customer install time reported is 14 minutes. A template and easy to follow instructions are included. The HAVEN is installed with 6 Philips head screws to attached the lock to your floor. The locking wedge gate cover is removed allowing the installer access to the 6 installation holes in the steel baseplate. Installation support videos can be found online.
Will HAVEN Fit My Door? Take the Nickel Test: HAVEN is 0.80 inches tall and should fit between the bottom of your door and the top of your floor. To test this, take a 5 cent USD nickel, stand it on its side and place on the floor in the path of the inswing door, make sure your door will pass over the nickel. If a gap is present, additional 1/8 inch wide risers are available. (One riser included in the box also works as installation template).
MADE IN THE USA: HAVEN Locks are invented and built in Tennessee by United States Special Operations Veterans. Haven is built with military grade materials to include industrial grade steel, nylon and thermoplastics Delrin for precision, stiffness and flexibility.